sm13t, sm13ts crystal 4 pad 7x5mm surface mount crystal ( metal cover seam sealed to ceramic base) sm13ts specifically designed for high shock applications solder pad compatible with our sm13h standard specifications calibration frequency tolerance at 25 c 5 0 ppm is standard, tighter tolerances available operating temperature range (otr) 0 to +70 c is standard, but can be extended to -40 to +85 c frequency stability (fs) over otr 5 0 ppm is standard, tighter tolerances available drive level 100 m w is standard, customer may specify aging at 25 c 3 ppm maximum oscillation maximum frequency range 6.001 ? 8.000 fundamental at cut 150 8.001 ? 9.000 80 3rd overtone at cut consult factory for available frequencies and specs. consult factory for lower esr (425) 776 - 1880, fax: (425) 776 - 2760, ple - sales@pletronics.com, www.pletronics.com 33 pl tronics, inc. mechanical: inches (mm) not to scale mode (mhz) esr (ohms) not all options available for all frequencies. a special par t number may be assigned. 6.001 mhz ? 80.000 mhz 9.001 ? 11.000 40 11.001 ? 50.000 30 26.000 ? 80.000 80 feb 2005 solder pads due to part size and factory abilities, part marking may var y from lot to lot and may contain our part number or an inte rnal code. max .276 (7.0 .2) .051 (1.3) .197 (5.0 .2) .055 (1.4) .079 (2.0) .161 (4.1) ple .043 (1.1) .100 (2.54) ple mechanical shock 5000 g's, 1/2 sine, 0.2 ms drop test 2 meter free fall onto a concrete floor, 10 times sm13ts only pl tronics , inc. 19013 36th ave. w, suite h lynnwood, wa 98036 usa manufacturer of high quality frequency control products . portions of the part number that appear after the frequency may not be marked on part (c of c provided) model frequency in mhz temperature range sm13ts b e - xx - 70.0m - xxx (internal code or blank) load capacitance parallel resonance in pf ( 3 10 pf) sr = series resonance blank: 0 to +70 c e: - 40 to +85 c h: - 20 to +70 c cal tol / freq stability blank = 50/50 a = 30/50 b = 30/30 c = 15/30 d = 10/20 (consult factory) sm13t: standard sm13ts: high shock recommend connecting case pads to gnd part numbering guide esr values packaging 16mm tape 12mm pitch case case
|
